Revision as of 11:04, 27 November 2007

Lets have to misconceptions here... Please. This guide, is only what it says it is. A Quick Install Guide. This guide, says very little, to nothing of how to secure your newly installed BSD system. Only the quickest, and easiest way to do so. Hopefully, someone rather knowledgeable in that subject will write that one for us.  ;)

Introduction

This guide, will cover installing FreeBSD 6.2-Release from CD/FTP for the Intel x86, x86-64, and AMD64 platforms. Since the variation between 32bit and 64bit is nominal, additional information or instructions will be indicated when applicable.

This guide, will also assume that the general person reading it, is migrating from a Windows environment. (ie. Windows ME, 2000, XP, Vista)

In the interim of this guide being completed, please refer to the installation chapters in The FreeBSD Handbook.

Thank you for your patience while I (we?) complete this. And have a scien-tastic day.

System Requirements

The basic system requirements, for installation of the AMD64 build of FreeBSD requires the following base hardware:

a 486 or better processor
at least 24 MB of RAM
150MB free HD space.
DVD/CD-ROM Drive
VGA Compatible video card
patience

Pre-Install Checklist

As you should be doing on a regular basis anyway (stops to laugh for a while). You need to make sure you have a good current backup of your data files. As with any operating system installation, you may accidentally delete something that you wanted to save. trust me. please.

The next step, is to check your personal hardware setup, verses that of the Intel - Hardware Compatibility List. Hopefully, you did this in the last step, but if you didn't, please take the time to do it now. It will save you some stress later. I promise.

Once you have determined whether or not your specific hardware is supported, you need to find windows drivers for your hardware that is not supported directly by BSD. Instructions will be given later on how to make all of your goodies work.

Ok, next comes your boot / install media. FTP, CD, DVD, or NetBoot are all nice options, but we're only talking about FTP, and CD/DVD. I suggest, that if you're going to download a medium from the FreeBSD Server, that you go ahead, and download the full disc one. Unless you're low on space, or have a thing for burning your installer to a business card cd. But generally, the first CD has the fixit recovery shell available, should you need to fix your fstab file or something like that <cough>.

I guess all you really need now, is a brief thing about the way BSD names devices.

fd0 is your floppy cd0 is your cdrom cd1 is your 2nd rom drive

ad0 is an ide device (sata, pata)

da0 is a scsi device

net0 is a networking card

fw0 is a firewire device

lo0 is your local loopback device (127.0.0.1)

Starting The Install

Hey, I told you I was working on it. :)