pavement

Set-ddns.pl router settings list

From FreeBSDwiki
(Difference between revisions)
Jump to: navigation, search
(→Xincom Twin Wan Router XC-DPG502)
 
(11 intermediate revisions by one user not shown)
Line 1: Line 1:
 +
This article contains a list of several methods of extracting and parsing your WAN IP address from various routers and externally hosted scripts, for use with [[BIND (dynamic DNS)|set-ddns.pl]], a script you can use to update a dynamic zone on a nameserver that you control.
 +
 +
If you have a router we haven't covered, and you adapt a method to extract its WAN IP, please feel free to add it here in a section headed by '''<nowiki>== Your Router's Model ==</nowiki>''' bracketed with twin equals signs.
 +
 +
 +
== Westech WireSpeed DualConnect Home DSL Gateway  ==
 +
 +
# BellSouth el cheapo residential gateway: there is no configurable username and password to set!
 +
# Just make sure that either your WireSpeed is still set to the factory default private IP address,
 +
# or that you adjust the router_url_string below to reflect whatever you have it set to now.
 +
 +
$router_url_string = '<nowiki>http://</nowiki>192.168.1.254/homeBS.htm';
 +
 +
$ua = LWP::UserAgent->new;
 +
$req = HTTP::Request->new('GET',$router_url_string);
 +
$resp = $ua->request($req)->as_string();
 +
 +
@body = split (/\n/, $resp);
 +
$WAN = '';
 +
foreach $string (@body) {
 +
    if ($WAN eq '') {
 +
          if ($string =~ /^var IpAddress \= \"(\d{0,3}\.\d{0,3}\.\d{0,3}\.\d{0,3})\"\;/) {
 +
                $WAN = $1;
 +
          }
 +
    }
 +
}
 +
 
== Xincom Twin Wan Router XC-DPG502 ==
 
== Xincom Twin Wan Router XC-DPG502 ==
  
Line 15: Line 42:
 
  $HOST2 = 'dsl.dynamic.domain.net';
 
  $HOST2 = 'dsl.dynamic.domain.net';
 
   
 
   
−
  $router_url_string = 'http://' . $ROUTER_USERNAME . ':' . $ROUTER_PASSWORD . '@' . $ROUTER_URL;
+
  $router_url_string = <nowiki>'http://'</nowiki> . $ROUTER_USERNAME . ':' . $ROUTER_PASSWORD . '@' . $ROUTER_URL;
 
  $ua = LWP::UserAgent->new;
 
  $ua = LWP::UserAgent->new;
 
  $req = HTTP::Request->new('GET',$router_url_string);
 
  $req = HTTP::Request->new('GET',$router_url_string);
Line 44: Line 71:
 
  close (NSUPDATE);
 
  close (NSUPDATE);
  
−
== Westech WireSpeed DualConnect Home DSL Gateway  ==
+
== Generic WAN-hosted script methods ==
  
−
  # BellSouth el cheapo residential gateway: there is no configurable username and password to set!
+
If you're having a particularly tough time trying to worm any useful information out of your router's regularly available configs, you can always fall back on hosting a script on your webserver and using it to feed your WAN IP back to you. You have three options here; a PHP script, a Perl-CGI, and a Bourne-CGI.  Each of them give output in the same format as http://checkip.dyndns.org - so tools designed to work with it will work with these, and vice versa.
 +
 
 +
This php version can be run from any php-enabled directory on your server - depending on your php configuration, you may be able to run it as ip.html, or you might need to name it ip.php.
 +
 
 +
&lt;html>
 +
&lt;head>
 +
&lt;?php $ip = $_SERVER['REMOTE_ADDR']; ?>
 +
&lt;title><nowiki>http://server.net/ip.php</nowiki>: &lt;?php echo $ip; ?>&lt;/title>
 +
&lt;/head>
 +
&lt;body>
 +
&lt;?php echo "Current IP Address: " . $ip; ?>
 +
&lt;/body>
 +
&lt;/html>
 +
 
 +
If you aren't having any luck with parsing your router's output ''or'' getting php to work on your webserver, this perl-CGI version produces exactly the same output as the php version above.  Place it in a cgi-enabled directory - on most servers, that will be http://server.net/cgi-bin/ip.cgi or something very like it.
 
   
 
   
−
  $router_url_string = 'http://192.168.1.254/homeBS.htm';
+
  #!/usr/bin/perl
 
   
 
   
 +
print "Content-type:text/html\n\n";
 +
print "<html><head><title>$ENV{REMOTE_ADDR}</title></head>\n";
 +
print "<body>Current IP Address: $ENV{REMOTE_ADDR}</body>\n";
 +
print "</html>\n";
 +
 +
If you still aren't having any luck (or expect TONS of traffic and prefer a bit lower overhead), you can also try this Bourne scripted version - it's text-only, so no IP address in the page title, but the body output is identical to the other two so that the same parser still works.
 +
 +
#!/bin/sh
 +
 +
cat <<EOF
 +
Content-type:text/plain
 +
 +
Current IP Address: ${REMOTE_ADDR}
 +
EOF
 +
 +
 +
== Generic parser for use with <nowiki>http://server.net/ip.php, http://server.net/cgi-bin/ip.cgi, or http://checkip.dyndns.org</nowiki> ==
 +
 +
(Remember to change $url_string to match the script you're referencing.)
 +
 +
$url_string = <nowiki>'http://server.net/ip.php'</nowiki>;
 
  $ua = LWP::UserAgent->new;
 
  $ua = LWP::UserAgent->new;
−
  $req = HTTP::Request->new('GET',$router_url_string);
+
  $req = HTTP::Request->new('GET',$url_string);
 
  $resp = $ua->request($req)->as_string();
 
  $resp = $ua->request($req)->as_string();
 
   
 
   
−
  @body = split (/\n/, $resp);
+
  $_ = $resp;
−
  $IP1 = '';
+
  m/.*?Current IP Address\: (\d{0,3}\.\d{0,3}\.\d{0,3}\.\d{0,3}).*/gs;
−
foreach $string (@body) {
+
$WAN = $1;
−
    if ($IP eq '') {
+
 
−
          if ($string =~ /^var IpAddress \= \"(\d{0,3}\.\d{0,3}\.\d{0,3}\.\d{0,3})\"\;/) {
+
== D-Link DGL-4300 802.11g MIMO "Gamer's Lounge" Router ==
−
                print "Found: $string \n";
+
 
−
                $IP1 = $1;
+
  # note: this sucker does fancy 'fake authentication' that uses some sort of session ID instead of
−
          }
+
# standard HTTP authentication.  It's certainly possible to mimic it using LWP::Credentials, but I'm not
−
    }
+
# feeling the need to actually fight it through right now - and since it supports true syslog output, it might
−
  }
+
# be easier just to set up a syslog server and monitor incoming syslog messages for the latest incoming
−
   
+
# line to match /.*?IP Address (\d{0,3}\.\d{0,3}\.\d{0,3}\.\d{0,3}) and default gateway/ and work from that.
−
  $WAN1 = $ip1;
+
  #
 +
  # of course, since this ''is'' only a single WAN router, you ''could'' always take the cheesy route and just fall back
 +
# on one of the external script methods outlined above. =)
 +
 
 +
[[Category:DNS]]

Latest revision as of 13:49, 21 June 2007

This article contains a list of several methods of extracting and parsing your WAN IP address from various routers and externally hosted scripts, for use with set-ddns.pl, a script you can use to update a dynamic zone on a nameserver that you control.

If you have a router we haven't covered, and you adapt a method to extract its WAN IP, please feel free to add it here in a section headed by == Your Router's Model == bracketed with twin equals signs.


Contents

[edit] Westech WireSpeed DualConnect Home DSL Gateway 

# BellSouth el cheapo residential gateway: there is no configurable username and password to set!
# Just make sure that either your WireSpeed is still set to the factory default private IP address,
# or that you adjust the router_url_string below to reflect whatever you have it set to now.

$router_url_string = 'http://192.168.1.254/homeBS.htm';

$ua = LWP::UserAgent->new;
$req = HTTP::Request->new('GET',$router_url_string);
$resp = $ua->request($req)->as_string();

@body = split (/\n/, $resp);
$WAN = ;
foreach $string (@body) {
    if ($WAN eq ) {
         if ($string =~ /^var IpAddress \= \"(\d{0,3}\.\d{0,3}\.\d{0,3}\.\d{0,3})\"\;/) {
               $WAN = $1;
         }
    }
}

[edit] Xincom Twin Wan Router XC-DPG502 

# This is a dual-homed router.  This code block assumes cable on WAN1 and dsl on WAN2, with a preference 
# for WAN1.  So three host records are kept: dynamic.domain.net for the default, cable.dynamic.domain.net
# for WAN1, and dsl.dynamic.domain.net for WAN2.  If you get fancy, you could even set something tricky 
# up on the server side to check WAN1 and WAN2 from the other side after they're established, and automatically 
# fail the "default" host, dynamic.domain.net, over to whichever side is still up if one of them fails.

$ROUTER_URL = '192.168.0.1/netstat.htm';
$ROUTER_USERNAME = 'admin';
$ROUTER_PASSWORD = 'password';

$HOST0 = 'dynamic.domain.net';
$HOST1 = 'cable.dynamic.domain.net';
$HOST2 = 'dsl.dynamic.domain.net';

$router_url_string = 'http://' . $ROUTER_USERNAME . ':' . $ROUTER_PASSWORD . '@' . $ROUTER_URL;
$ua = LWP::UserAgent->new;
$req = HTTP::Request->new('GET',$router_url_string);
$resp = $ua->request($req)->as_string();

# Simplest to just count the dotted quads: WAN1 and WAN2 are the second and third one in.
$_ = $resp;
($ip1, $ip2, $ip3) = /\d{0,3}\.\d{0,3}\.\d{0,3}\.\d{0,3}/gs;

$WAN1 = $ip2;
$WAN2 = $ip3;

# You don't want to cycle through set-ddns.pl for each host - it's MUCH slicker and quicker to send all
# three updates in a single nsupdate invocation.  Note: I chose to skip the "show" command on nsupdate here.
# It's handy for manual troubleshooting, but unnecessary once you have everything working and you're relying
# on a crontab piping the output to /dev/null anyway.

chdir ($KEYDIR);
open (NSUPDATE, "| /usr/sbin/nsupdate -k $KEYFILE");
print NSUPDATE "server $NAMESERVER\n";
print NSUPDATE "update delete $HOST0 A\n";
print NSUPDATE "update delete $HOST1 A\n";
print NSUPDATE "update delete $HOST2 A\n";
print NSUPDATE "update add $HOST0 $TTL A $WAN1\n";
print NSUPDATE "update add $HOST1 $TTL A $WAN1\n";
print NSUPDATE "update add $HOST2 $TTL A $WAN2\n";
print NSUPDATE "send\n";
close (NSUPDATE);

[edit] Generic WAN-hosted script methods

If you're having a particularly tough time trying to worm any useful information out of your router's regularly available configs, you can always fall back on hosting a script on your webserver and using it to feed your WAN IP back to you. You have three options here; a PHP script, a Perl-CGI, and a Bourne-CGI. Each of them give output in the same format as http://checkip.dyndns.org - so tools designed to work with it will work with these, and vice versa.

This php version can be run from any php-enabled directory on your server - depending on your php configuration, you may be able to run it as ip.html, or you might need to name it ip.php. 

<html>
<head>
<?php $ip = $_SERVER['REMOTE_ADDR']; ?>
<title>http://server.net/ip.php: <?php echo $ip; ?></title>
</head>
<body>
<?php echo "Current IP Address: " . $ip; ?>
</body>
</html>

If you aren't having any luck with parsing your router's output or getting php to work on your webserver, this perl-CGI version produces exactly the same output as the php version above. Place it in a cgi-enabled directory - on most servers, that will be http://server.net/cgi-bin/ip.cgi or something very like it. 

#!/usr/bin/perl

print "Content-type:text/html\n\n";
print "<html><head><title>$ENV{REMOTE_ADDR}</title></head>\n";
print "<body>Current IP Address: $ENV{REMOTE_ADDR}</body>\n";
print "</html>\n";

If you still aren't having any luck (or expect TONS of traffic and prefer a bit lower overhead), you can also try this Bourne scripted version - it's text-only, so no IP address in the page title, but the body output is identical to the other two so that the same parser still works. 

#!/bin/sh

cat <<EOF
Content-type:text/plain

Current IP Address: ${REMOTE_ADDR}
EOF


[edit] Generic parser for use with http://server.net/ip.php, http://server.net/cgi-bin/ip.cgi, or http://checkip.dyndns.org

(Remember to change $url_string to match the script you're referencing.) 

$url_string = 'http://server.net/ip.php';
$ua = LWP::UserAgent->new;
$req = HTTP::Request->new('GET',$url_string);
$resp = $ua->request($req)->as_string();

$_ = $resp;
m/.*?Current IP Address\: (\d{0,3}\.\d{0,3}\.\d{0,3}\.\d{0,3}).*/gs;
$WAN = $1;

[edit] D-Link DGL-4300 802.11g MIMO "Gamer's Lounge" Router 

# note: this sucker does fancy 'fake authentication' that uses some sort of session ID instead of
# standard HTTP authentication.  It's certainly possible to mimic it using LWP::Credentials, but I'm not 
# feeling the need to actually fight it through right now - and since it supports true syslog output, it might 
# be easier just to set up a syslog server and monitor incoming syslog messages for the latest incoming
# line to match /.*?IP Address (\d{0,3}\.\d{0,3}\.\d{0,3}\.\d{0,3}) and default gateway/ and work from that.
# 
# of course, since this is only a single WAN router, you could always take the cheesy route and just fall back
# on one of the external script methods outlined above. =)
Retrieved from "http://freebsdwiki.net/index.php?title=Set-ddns.pl_router_settings_list&oldid=8546"
Personal tools