Desktop, light setup

From FreeBSDwiki

(Difference between revisions)

Latest revision as of 15:30, 11 February 2018

After installing and configuring the base system, here are instructions on how to get a light desktop up and running quickly. Xinit and XDM login managers are covered. Configuration of KDM, GDM, WDM and SLiM login managers is not described here, because they are part of windowmanagers that are not BSD style or are outdated.

[edit] Install

The following input is sufficient to install the programs for a running Desktop system:

% pkg install xorg jwm xdm

In this example, replace jwm with your chosen window manager. If you're not using a graphical desktop login manager, remove xdm from above.

[edit] Desktop login

Configuration files for XDM and Xinit are under the /usr/local/etc/X11/ and ~/ directories, respective to Xsession and Xinit. The minimal configuration for .xsession or .xinit in your home directory is:

#!/bin/sh
exec /usr/local/bin/<windowmanager>

[edit] Console

Set .xinitrc in each home folder, to load custom settings from that user's command line. The default /usr/local/etc/xinit/xinitrc points to several other files in your home directory.

Make sure the owner file permissions of .xinitrc are at minimum set to read.

% chmod 440 .xinitrc

Finally, type startx.

[edit] XDM

To configure x11/xdm to start up on boot, edit /etc/ttys and change the option on line ttyv8 from off to on:

ttyv8   "/usr/local/bin/xdm -nodaemon"  xterm   on secure

The secure option allows logging in to the root console without a password from single user mode.

Set up .xsession with owner and group permissions to read and execute. If you soft link .xsession and .xinitrc together, both permissions must be 550.

ln -s .xsession .xinitrc
chmod 550 .xsession

Under normal circumstances, /usr/local/etc/X11/xdm/Xsession should be left alone, because this file by default points to ~/.xsession and ~/.xsession-errors.

[edit] Customization

Customization files for XDM are located in /usr/local/etc/X11/xdm/.

The background image or color can be changed with a command argument in Xsetup_0. xsetroot can set the background to a color or bitmap image. To choose a common image type, use a program such as x11/bgs or graphics/feh from within Xsetup_0.

Example of Xsetup_0:

#!/bin/sh
bgs /home/mydirectory/mypicture.png &
#xconsole &

The xconsole line can optionally be commented out. x11/xconsole is useful for displaying terminal output.

It is important to add an & after adding new configuration commands, or the login screen will freeze up with certain commands.

To change the box logo, edit Xresources, comment out or reference another .xpm file in the lines xlogin*logoFileName.

[edit] Desktop programs

Read the documentation of your chosen window manager's configuration files to load programs, if it is available. If your window manager doesn't have the ability to load desktop programs, use .xsession or .xinitrc, to start them.

Example of .xsession or .xinitrc:

#!/bin/sh
xterm &
xclock &
exec jwm

Programs are loaded with &, and the window manager is loaded last with exec.

[edit] Xorg

Xorg is now mostly auto-configured. xorg.conf is no longer used, but it is replaced by the directory /usr/local/etc/X11/xorg.conf.d/ for specific configurations only. The syntax of a configuration filename in this directory is <customname>.conf, such as 10-nvidia.conf.

See Configuring X and the FreeBSD Handbook: The X Window System for more information.

[edit] Enabling hardware

To enable the mouse and keyboard, considering that recent versions of xorg are set to use autodetection by default.

Add the following to /etc/rc.conf:

dbus_enable="YES"

For using devfs, add to /etc/fstab:

devfs      /dev       devfs     rw   0 0 # not necessary unless custom configuration is needed
fdescfs    /dev/fd    fdescfs   rw   0 0

fdescfs(5) can alternatively be loaded through compiling in the kernel or through /boot/loader.conf. x11-servers/xorg-server has to be built without the hal option for this configuration.

See the manpages: devd(), devfs(), devfs.conf() and devfs.rules(). For advanced topics on hardware configuration, such as information about videocards, enabling HDMI audio out, and using multiple displays, see Hardware Configuration, Audio/Video.

[edit] See also

Hardware Configuration, Audio/Video - for setting up: ATI, Intel or Nvidia graphics cards; multiple monitors; audio; and overscan
Desktop, troubleshooting
Window Managers, BSD

[edit] References

FreeBSD 6 Unleashed (2006)
FreeBSD related documentation and forums

@@ Line 1: / Line 1: @@
-After installing the base system, here are instructions on how to get a desktop up and running quickly. The example provided shows how to get xdm login manager with JWM, but these examples should provide useful information for using other session managers or desktops.
+After installing and configuring the base system, here are instructions on how to get a light desktop up and running quickly. {{yhl|Xinit}} and {{yhl|XDM}} login managers are covered. Configuration of KDM, GDM, WDM and SLiM login managers is not described here, because they are part of windowmanagers that are not BSD style or are outdated.
 ==Install==
-The input "'''pkg install xdm jwm xorg'''" is sufficient to install the programs for a running Desktop system.
+The following input is sufficient to install the programs for a running Desktop system:
+ % pkg install xorg jwm xdm
+In this example, replace jwm with your chosen window manager. If you're not using a graphical desktop login manager, remove xdm from above.
-==Session manager set up==
+==Desktop login==
-Basic session managers are XDM, WDM, and slim. KDM and GDM are other options for a not minimal system.
+Configuration files for XDM and Xinit are under the {{file|/usr/local/etc/X11/}} and {{file|~/}} directories, respective to Xsession and Xinit. The minimal configuration for {{file|.xsession}} or {{file|.xinit}} in your home directory is:
+ #!/bin/sh
+ exec ''/usr/local/bin/<windowmanager>''
-To configure xdm to start up on boot edit ''/etc/ttys'' and change the option on line ttyv8 from '''off''' to '''on'''. The '''secure''' setting is also of interest here.
+===Console===
+Set {{file|[[.xinitrc]]}} in each home folder, to load custom settings from that user's command line. The default {{file|/usr/local/etc/xinit/xinitrc}} points to several other files in your home directory.
-The slim configuration files are at ''/user/local/etc/''. To enable slim add '''slim_enable="YES'''' to ''/etc/slim.conf''. Older versions of slim could have their window manager configured in the file ''slim.conf'' under desktop session. Newer versions of slim require a ''*.desktop'' file in a directory that is specified in the location by ''slim.conf'' typically this would be ''/usr/local/share/xsessions''
+Make sure the owner file permissions of {{file|[[.xinitrc]]}} are at minimum set to read.
+ % chmod 440 .xinitrc
-The ''usr/local/share/xsessions/*.desktop'' file commands must be in xdg-style, shown here http://standards.freedesktop.org/desktop-entry-spec/desktop-entry-spec-1.0.html#basic-format.
+Finally, type {{cmd|startx}}.
-Example of ''jwm.desktop'' file:
+===XDM===
-  Name=JWM
+To configure {{port|x11/xdm}} to start up on boot, edit {{file|/etc/ttys}} and change the option on line {{code|ttyv8}} from {{code|off}} to {{code|on}}:
-  Exec=jwm
+  ttyv8   "/usr/local/bin/xdm -nodaemon"  xterm   '''on''' secure
+The {{code|secure}} option allows logging in to the root console without a password from single user mode.
-==Desktop set up==
+Set up {{file|.xsession}} with owner and group permissions to read and execute. If you soft link {{file|.xsession}} and {{file|.xinitrc}} together, both permissions must be 550.
-For session managers be sure to create the files ''.xinitrc'' and ''.xsession'' in the home folder. One of these files is needed to start a window manager from startx, and the other is needed to start a window manager from a session manager, otherwise the session manager will reload. ''.xinitrc'' and ''.xsession'' files are identical. Another version of these two files exists in ''/usr/local/etc/'', but use the file in the home folder for custom changes. Be sure to add '''exec [window manager]'''. Do not add an '''&''' after this, only add a space and ampersand after programs that are meant to run and detach.
-Example of both ''.xinitrc'' and ''.xsession'' files:
+ ln -s .xsession .xinitrc
-  # '''exec jwm'''
+  chmod 550 .xsession
-To enable the mouse and keyboard add '''hald_enable="YES"''' and '''dbus_enable="YES"''' to ''/etc/rc.conf''. Enabling these options sooner may make it harder to fix problems. Older versions of FreeBSD required the line '''Option "AllowEmptyInput" "False"''' to be manually set in the Xorg configuration file.
+Under normal circumstances, {{file|/usr/local/etc/X11/xdm/Xsession}} should be left alone, because this file by default points to {{file|~/.xsession}} and {{file|~/.xsession-errors}}.
+====Customization====
+Customization files for XDM are located in {{file|/usr/local/etc/X11/xdm/}}.
+The background image or color can be changed with a command argument in {{file|Xsetup_0}}. {{cmd|xsetroot}} can set the background to a color or bitmap image. To choose a common image type, use a program such as {{port|x11/bgs}} or {{port|graphics/feh}} from within {{file|Xsetup_0}}.
+Example of {{file|Xsetup_0}}:
+ #!/bin/sh
+ bgs /home/mydirectory/mypicture.png &
+ #xconsole &
+The {{code|xconsole}} line can optionally be commented out. {{port|x11/xconsole}} is useful for displaying terminal output.
+It is important to add an {{code|&}} after adding new configuration commands, or the login screen will freeze up with certain commands.
+To change the box logo, edit {{file|Xresources}}, comment out or reference another .xpm file in the lines {{code|xlogin*logoFileName}}.
+==Desktop programs==
+Read the documentation of your chosen window manager's configuration files to load programs, if it is available. If your window manager doesn't have the ability to load desktop programs, use {{file|.xsession}} or {{file|.xinitrc}}, to start them.
+Example of {{file|.xsession}} or {{file|.xinitrc}}:
+ #!/bin/sh
+ xterm &
+ xclock &
+ exec jwm
+Programs are loaded with {{code|&}}, and the window manager is loaded last with {{code|exec}}.
+==Xorg==
+Xorg is now mostly auto-configured. {{file|xorg.conf}} is no longer used, but it is replaced by the directory {{file|/usr/local/etc/X11/xorg.conf.d/}} for specific configurations only. The syntax of a configuration filename in this directory is <customname>.conf, such as {{file|''10-nvidia.conf''}}.
+See [[Configuring X]] and the  [http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/x11.html FreeBSD Handbook: The X Window System] for more information.
+===Enabling hardware===
+To enable the mouse and keyboard, considering that recent versions of xorg are set to use autodetection by default.
+Add the following to {{file|/etc/rc.conf}}:
+ dbus_enable="YES"
+For using devfs, add to {{file|/etc/fstab}}:
+ devfs      /dev       devfs     rw   0 0 # not necessary unless custom configuration is needed
+ fdescfs    /dev/fd    fdescfs   rw   0 0
+{{man|fdescfs|5}} can alternatively be loaded through compiling in the kernel or through {{file|/boot/loader.conf}}. {{port|x11-servers/xorg-server}} has to be built without the hal option for this configuration.
+See the manpages: {{man|devd}}, {{man|devfs}}, {{man|devfs.conf}} and {{man|devfs.rules}}. For advanced topics on hardware configuration, such as information about videocards, enabling HDMI audio out, and using multiple displays, see [[Hardware Configuration, Audio/Video]].
+==See also==
+* [[Hardware Configuration, Audio/Video]] - for setting up: ATI, Intel or Nvidia graphics cards; multiple monitors; audio; and overscan
+* [[Desktop, troubleshooting]]
+* [[Window Managers, BSD]]
+== References==
+* FreeBSD 6 Unleashed (2006)
+* FreeBSD related documentation and forums
 [[Category:FreeBSD for Workstations]]
 [[Category:FreeBSD Multimedia]]
+[[Category:Configuring FreeBSD]]
+[[Category:New_User_Tips_and_FAQs]]

Desktop, light setup

Latest revision as of 15:30, 11 February 2018

Contents

[edit] Install

[edit] Desktop login

[edit] Console

[edit] XDM

[edit] Customization

[edit] Desktop programs

[edit] Xorg

[edit] Enabling hardware

[edit] See also

[edit] References

Views

Personal tools

Navigation

Search

Toolbox