Network, Wireless
From FreeBSDwiki
(Difference between revisions)
m (→wpa supplicant) |
m (→rc.conf: defaultrouter has no _) |
||
| (10 intermediate revisions by one user not shown) | |||
| Line 1: | Line 1: | ||
| − | Here is how to set up a wireless network. This example will demonstrate how to use WPA2-PSK method. | + | Here is how to set up a wireless network. This example will demonstrate how to use the WPA2-PSK method. |
==wpa supplicant== | ==wpa supplicant== | ||
This example shows a non-broadcasted network, and use of WPA2 with a preshared key. | This example shows a non-broadcasted network, and use of WPA2 with a preshared key. | ||
| − | + | ||
| + | {{file|/etc/wpa_supplicant.conf}}: | ||
| + | ctrl_interface=/var/run/wpa_supplicant | ||
| + | eapol_version=2 | ||
| + | ap_scan=1 | ||
network={ | network={ | ||
| − | + | bssid=''gatewaymacaddress'' | |
| − | + | ssid="''networkidname''" | |
| − | + | bssid=''bssid'' | |
| − | + | scan_ssid=0 | |
| − | + | psk="''networkpassword''" | |
| − | + | priority=9 | |
| − | + | proto=RSN | |
| − | + | key_mgmt=WPA_PSK | |
| − | + | group=CCMP | |
| + | pairwise=CCMP | ||
} | } | ||
| − | + | The value of {{code|eapol_version}} depends on your router, so you'll have to test values 0 through 2. For FreeBSD or {{man|wlan|4}}, {{code|ap_scan}} should always be set to 1. | |
| − | Once the network is set up, | + | {{code|scan_ssid}} set to 1 hides the wireless card, while the value of 0 broadcasts its presence. Giving the {{code|ssid}} allows the network to be found, when it is hidden from scans. |
| + | |||
| + | {{code|RSN}} signifies WPA2. {{code|key_mgmt}}, {{code|group}}, and {{code|pairwise}} are common parameters for wireless protocols. | ||
| + | |||
| + | Once the network is set up, {{code|bssid}} can inserted later, it can be found by either | ||
% ifconfig | grep bssid | % ifconfig | grep bssid | ||
| + | % ifconfig wlan0 list scan | ||
==rc.conf== | ==rc.conf== | ||
hostname="''mycpomputerhostname''" | hostname="''mycpomputerhostname''" | ||
wlans_''networkcarddriver0''="wlan0" | wlans_''networkcarddriver0''="wlan0" | ||
| − | + | defaultrouter="''ipaddress''" # example 192.168.1.254 | |
| − | Set the default network connection, to prevent it from guessing which network to use. Add | + | Set the default network connection, to prevent it from guessing which network to use. Add {{code|mode}}, {{code|ssid}}, and {{code|bssid}} in the {{code|ifconfig}} line. The values typically match what's in {{file|wpa_supplicant.conf}}. |
| − | ifconfig_wlan0=" | + | ifconfig_wlan0="ssid ''networkidname'' bssid ''macaddressofnetwork'' WPA DHCP" |
| − | Some settings can be found by typing, optionally using | + | Some settings can be found by typing, optionally using {{cmd|grep}} |
% ifconfig | grep mode | % ifconfig | grep mode | ||
| Line 36: | Line 46: | ||
% service netif restart | % service netif restart | ||
% wpa_supplicant -i wlan0 -c /etc/wpa_supplicant.conf & | % wpa_supplicant -i wlan0 -c /etc/wpa_supplicant.conf & | ||
| + | % ifconfig | ||
| + | |||
| + | [[Category:Configuring FreeBSD]] | ||
| + | [[Category:FreeBSD for Servers]] | ||
| + | [[Category:Important Config Files]] | ||
| + | [[Category:New_User_Tips_and_FAQs]] | ||
Latest revision as of 07:06, 30 May 2018
Here is how to set up a wireless network. This example will demonstrate how to use the WPA2-PSK method.
[edit] wpa supplicant
This example shows a non-broadcasted network, and use of WPA2 with a preshared key.
/etc/wpa_supplicant.conf:
ctrl_interface=/var/run/wpa_supplicant
eapol_version=2
ap_scan=1
network={
bssid=gatewaymacaddress
ssid="networkidname"
bssid=bssid
scan_ssid=0
psk="networkpassword"
priority=9
proto=RSN
key_mgmt=WPA_PSK
group=CCMP
pairwise=CCMP
}
The value of eapol_version depends on your router, so you'll have to test values 0 through 2. For FreeBSD or wlan(4), ap_scan should always be set to 1.
scan_ssid set to 1 hides the wireless card, while the value of 0 broadcasts its presence. Giving the ssid allows the network to be found, when it is hidden from scans.
RSN signifies WPA2. key_mgmt, group, and pairwise are common parameters for wireless protocols.
Once the network is set up, bssid can inserted later, it can be found by either
% ifconfig | grep bssid % ifconfig wlan0 list scan
[edit] rc.conf
hostname="mycpomputerhostname" wlans_networkcarddriver0="wlan0" defaultrouter="ipaddress" # example 192.168.1.254
Set the default network connection, to prevent it from guessing which network to use. Add mode, ssid, and bssid in the ifconfig line. The values typically match what's in wpa_supplicant.conf.
ifconfig_wlan0="ssid networkidname bssid macaddressofnetwork WPA DHCP"
Some settings can be found by typing, optionally using grep
% ifconfig | grep mode
[edit] final steps
% service netif restart % wpa_supplicant -i wlan0 -c /etc/wpa_supplicant.conf & % ifconfig
