Desktop, light setup

Revision as of 22:46, 7 March 2015

After installing and configuring the base system, here are instructions on how to get a light desktop up and running quickly. The instructions provided show how to get xdm, slim or wdm login managers working. This example on the window manager JWM should provide insight on how to install other window managers.

Install

The following input is sufficient to install the programs for a running Desktop system:

% pkg install xorg jwm slim

Alternatively, ports may be installed. xdm and wdm login managers are other options.

Login manager set up

Basic session managers are XDM, WDM, and slim. After the login manager is configured, the Desktop and a home file of .xinitrc must be set up, or the screen will go into a loop, back to the login manager after logging in. The .xinitrc file must also be set up to use the same window manager as configured in your login manager. KDM and GDM login manager installations are not covered here, because they are part of base windowmanagers with heavy dependencies.

Command-line and login manager preparation setup

First, set up an .xinitrc file in the home folder, which is simular to /usr/local/etc/X11/xinit/xinitrc.

Without .xinitrc in each home folder, the window manager will fail to load from startx. Both .xinitrc and .xsession are needed for your login manager. The contents of .xinitrc are exactly like the .xsession file, except .xsession has to be made executable.

Be sure to add exec [window manager] to the .xinitrc file, without an &. Here is an example of both .xsession and .xinitrc files:

#!/bin/sh
exec /usr/local/bin/jwm

Optionally, a symbolic link can be created between these two files. To make .xsession executable type:

% chmod +x .xsession

Once it is set up, type:

% startx

or proceed with your choice of login manager.

Slim

Slim is a practical choice for a login manager, unless remote login access is needed. To enable slim, edit /etc/ttys to :

ttyv8   "/usr/local/bin/slim"           xterm   on secure

Slim requires a *.desktop file in a directory that is specified by /usr/local/etc/slim.conf next to the sessiondir option; typically this would be /usr/local/share/xsessions. Older versions of slim could have their window manager configured in the file slim.conf by the sessions option.

The usr/local/share/xsessions/*.desktop file commands must be in xdg-style, shown here http://standards.freedesktop.org/desktop-entry-spec/desktop-entry-spec-1.0.html#basic-format.

First create the desktop directory, if it doesn't exist, by typing:

% mkdir -p /usr/local/share/xsessions/

Example of /usr/local/share/xsessions/jwm.desktop file:

Name=JWM
Exec=jwm

Customization

To change the background, look into /usr/local/share/slim/themes/default/, create a backup file of background.jpg, then copy your choice background image to /usr/local/share/slim/themes/default/background.jpg

% cd /usr/local/share/slim/themes/default
% mv background.jpg background.bk.jpg
% mv [pathname/your file] background.jpg

To create multiple themes, you may create a new directory under themes/ that is similar to the default/ directory, then specify this themes subdirectory from /usr/local/etc/slim.conf. If you do this, be sure each used folder ends off with three files named: slim.theme , background.jpg and panel.png.

Add or edit your themes to slim.conf :

#current theme, use comma separated list to specify a set to randomly choose from
current_theme       default,mytheme

To create themes directories:

% cd /usr/local/share/slim/themes
% cp -R default mytheme

Then edit the mytheme/ files to your liking. For more details of slim configuration, type either:

% man slim
% less /usr/local/etc/slim.conf.sample

XDM

To configure xdm to start up on boot, edit /etc/ttys and change the option on line ttyv8 from off to on:

ttyv8   "/usr/local/bin/xdm -nodaemon"  xterm   on secure

Read about the secure setting in this file.

Then set up identical .xsession and .xinitrc files in each home folder, with the contents and permissions as shown in the above section.

If problems occur, check the file /var/log/xdm.log

% less /var/log/xdm.log

Customization files for XDM are located at /usr/local/lib/X11/xdm. See XFree Local Multi-User HOWTO: Using xdm and FreeBSD Handbook: XDM Configuration Files.

WDM

Here is how to set up Wings Display Manager's (WDM).

To enable WDM, edit line ttyv8 in file /etc/ttys to:

ttyv8   "/usr/local/bin/wdm -nodaemon"  xterm   on secure

It's configuration files are at /usr/local/lib/X11/wdm/.

Make sure the file /usr/local/lib/X11/wdm/wdm-config lists your window manager on the line DisplayManager*wdmWm:. The default window manager for WDM is windowmaker:

DisplayManager*wdmWm:           wmaker:afterstep:blackbox:ctwm:enlightenment:fvwm:fvwm2:fvwm95:olvwm:qvwm:tvtwm:jwm

After rebooting, click the option on WDM's login screen, before logging in.

Desktop programs

Some desktop programs should be started through the window manager's configuration files, and others can be started through .xinitrc or .xsession.

For .xinit and .xsession only add a space and ampersand & after programs that are meant to run and detach.

Xorg

If an error is made, making it harder to edit files from the command prompt, reboot into single user mode, then remount the drive using the command:

% mount -u /

To create a custom xorg configuration file:

% Xorg -configure

After testing this configuration, xorg.conf.new can be copied to /etc/X11/xorg.conf:

% cp /root/xorg.conf.new /etc/X11/xorg.conf

See Configuring X and the FreeBSD Handbook: Chapter 6. The X Window System for more information.

Enabling hardware

To enable the mouse and keyboard, considering that recent versions of xorg are set to use autodetection by default.

Add the following to /etc/rc.conf :

dbus_enable="YES"

For using devfs, add to /etc/fstab :

devfs           /dev            devfs     rw      0       0  # This line may not be necessary, since devfs automatically uses /dev
fdesc           /dev/fd         fdescfs   rw      0       0

Programs may have to be built without the hal option. See the manpages: devfs, devfs.conf, devfs.rules, and fdescfs.

Obsolete configuration reference

Older versions of FreeBSD and xorg required the line in the Xorg configuration file, to enable the mouse and keyboard, to be manually set to:

Option "AllowEmptyInput" "False"

/etc/rc.conf :

hald_enable="YES" #this option can be replaced with FreeBSD's native programs devfs and fdesc through the fstab file.

References

• FreeBSD 6 Unleashed (2006)
• Various FreeBSD and other related forums
• FreeBSD and programs documentation