View source

You do not have permission to edit this page, for the following reason:

You can view and copy the source of this page:

==Your DNS network design== Ideally, the strongest layout consists of '''at least''' two DNS servers on two wholly separate networks -- separate physically and logically (different locations, different IP nets.) At least two, because really you'll probably want three -- two that people know about and one that people don't know about: your hidden master DNS server. So: make two slave DNS servers, point them to your authoritative nameserver, which for the sake of security should only allow updates TO your slaves and connections FROM your admin's IP addresses and the slave servers. If you can, make it a non-routeable address (10.0.0.0/8, 192.168/16, etc) that your slaves reach either directly or through a NAT'd firewall. ==Do Not Pass Go, Do Not Collect 200$, Go Directly to Jail== Setting your DNS server inside a jail means that you're going to have a bit of a pain on the initial setup and install but you'll be that much more secure if your DNS server '''does''' get hacked. By placing just what it needs to run and nothing else in the jail, anyone that gets in will have a harder time doing anything with your server or to your network; no compilers means no binaries can be built on your system itself to give you a trojan: your would-be attackers would have to build the binaries somewhere else and copy them over and hope they work on your system. If you've got backups of your DNS data -- and you should, the slaves would essentially function as backups -- then even the dreaded '''rm -rf /''' inside your jail shouldn't be fatal: promote your slave to master for all your zones, '''rm -rf''' your jail directory and re-create it, make it a slave and copy your data over again by [[HUP]]'ing your server and you're good to go (you'll probably want to find out how they got in to do Bad Things so that it doesn't happen again, though). ==Don't run as root== Make a dns account to run your nameserver from; block it from accessing the net over anything but UDP/TCP ports 53 (using [[ACL]]s or a firewall etc). ==Use Views== Views are a feature of BIND 9, essentially it boils down to keeping two sets of data for a given zone and setting an [[ACL]] for each of them. So that internally, your network has a DNS server that has records for every machine you want -- every single networked printer, router, switch, workstation and server, if you like -- and externally, only what needs to be accessible from the world has a record. ==Don't rely on just network security or just host security: use both== Well, your network has a [[bastion host]] and it's protecting the whole network, including your DNS server, so why worry, right? Right. Maybe. Or Maybe Wrong. Maybe really wrong. In any case, better safe than sorry: recompile your FreeBSD kernel and include [[ipfw]] in it and set your firewall rules to just what you need: UDP/TCP 53 (DNS), TCP 22 (SSH), and possibly your [[webmin]] management port for your networks. ==Poison is bad== DNS cache poisoning is one of many REALLY good reasons not to keep running ancient and outdated DNS services (like the BIND4 that shipped on those Sun servers your organization insists on maintaining for at least 30 more years). It's a little complicated to follow if you aren't familiar with the ins and outs and quirks of DNS resolution, but here's how it works: # this is an example of a zone file a black hat would use to poison a victim's DNS cache. # this file is being run by the black hat on his own machine, '''at IP address 1.2.3.4'''. # poisoner.tld. IN SOA ns.poisoner.tld hostmaster.poisoner.tld. (34; 10800; 3600; 604800; 10;) poisoner.tld. IN NS ns.victim.tld. # this record tells anyone asking about poisoner.tld to go to ns.victim.tld ns.victim.tld. IN A 1.2.3.4 # this record is the sneaky one - it "helpfully" tells them that the IP # address for ns1.victim.tld is THIS machine's IP address! # this is the bogus version of the victim.tld zone file which the black hat runs on the same # server as the poison file, above. After ns.victim.tld's cache is poisoned, it will actually # send users here instead of answering their queries itself! # victim.tld. IN SOA ns.victim.tld hostmaster.victim.tld. (34; 10800; 3600; 604800; 10;) victim.tld. IN NS ns.victim.tld. # these two records simply say "yes, I'll tell you all about victim.tld, don't ns.victim.tld. IN A 1.2.3.4 # go anywhere else to ask" www.victim.tld. IN A 1.2.3.5 # this is the IP address of a webpage chock full of spammy ads and malware After the [[black hat]] sets up his domain and the bogus zone files above on his own server, at IP address 1.2.3.4, he asks the ''real'' nameserver for '''victim.tld''' to tell him what the IP address for '''www.poisoner.tld''' is. Since it doesn't know, it asks '''ns.poisoner.tld''', which tells it that it needs to ask '''ns.victim.tld''' ''at the IP address 1.2.3.4'' for that information. The victim caches that query result - so from here on out, even though it ''is'' '''ns.victim.tld''', if you ask it how to find '''ns.victim.tld''', it will respond with the [[black hat]]'s IP address, not its own. And since the first step of client DNS resolution is to resolve the IP address of the [[authoritative nameserver]] for a domain, that further means that from here on out, any time anybody looks up ''any'' URL in the victim.tld domain, they'll get sent to the [[black hat]]'s nameserver - which will cheerfully send them to his own webpage full of ads and malware! The good news is, DNS cache poisoning has been fixed (by refusing to cache query results coming from servers that aren't actually authoritative for the results they are giving) in BIND since 1997. The bad news is, enough people are still running ancient legacy DNS services that there are still plenty of [[black hat]]s industriously trying to poison everything in sight just to see if it works. Avoiding DNS cache poisoning is much simpler than understanding it: don't run outdated DNS services, make your authoritative servers non-recursive (don't let them answer questions about domains they aren't authoritative for), and wherever possible, limit public access to any caching DNS servers you run for you and/or your clients' benefit. To learn more about poisoning, see Daniel J. Bernstein's article at http://cr.yp.to/djbdns/notes.html#poison To see if you can be poisoned, see http://ketil.froyn.name/poison.html == See Also == [[BIND (installing)]], [[BIND (configuring)]], [[BIND (managing)]] ==External Links== [[http://www.oreilly.com/catalog/dns4/chapter/ch11.html O'Reilly's BIND book's security chapter]] [[http://www.boran.com/security/sp/bind_hardening8.html Hardening BIND 8]] [[http://www.boran.com/security/sp/bind9_20010430.html Hardening BIND 9]] [[http://www.boran.com/security/sp/chrooting_bind.html Info on chroot'ing]] [[http://sysadmin.oreilly.com/news/views_0501.html Implementing Views in BIND 9, by Cricket Liu]]. Thumbing through O'Reilly's DNS & BIND book is highly recommended -- Cricket Liu quite literally wrote the book on DNS. [[Category:Ports and Packages]] [[Category:Configuring FreeBSD]] [[Category:Securing FreeBSD]] [[Category:DNS]]

Return to BIND, securing.